Lock washer S Spring steel, plain
Plain spring steel type S
WSH-LOK-S-3,2X1,7X0,35
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
 | |
Internal diameter (d1) | 1.7 mm |
Outer diameter (d2) | 3.2 mm |
Height (h1) | 0.6 mm |
Thickness (s1) | 0.35 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Mounting tweezers 45° angled down
Endoscope video probe One Way
Safety knife Martor Secupro Maxisafe 10150610.02
Levelling set Three pieces
Welding glove Hase® Oslo 5-finger 100500
Setting tool For manual installation
Cover cap
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Radiator sealant HP
Pan head screw with hexalobular head Similar to DIN 7985, steel 8.8, plain
