Lock washer S Spring steel, zinc-flake coating, silver (ZFSH)
Sprin steel flake zinc silver type S
WSH-LOK-S-ZFSH-D16,0
Register now and access more than 125,000 products
Belleville washer shape
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads that are vertical to the screw axis – to prevent the connection from loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
 | |
Suitable for screw thread | M16 |
Suitable for thread (imperial) | 5/8 inch |
Internal diameter (d1) | 17 mm |
Outer diameter (d2) | 24 mm |
Height (h1) | 2.1 mm |
Thickness (s1) | 1.3 mm |
Material | Spring steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Form | S |
Locking function | Embedding locking device |
Last viewed
Locking system DUAL
Wide wale corduroy tradesman's trousers with flared leg
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain
Protective caps GPN 255 Silicone (SI), natural
Subland stepped drill bit, DIN 8374 RN medium, 90°
Reserve taper grooved dowel pin ISO 8741 steel plain
Polishing machine PM 200-E
Door handle AL 920
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B