Lock washer VS A2 stainless steel
Stainless steel A2 type VS
WSH-LOK-A2-VS-13,0X8,4X1,50
Register now and access more than 125,000 products
The Belleville washer shape achieves an optimum friction fit with simultaneous mechanical interlock via the helical gearing. Higher pre-tensioning forces can be achieved due to the washer's increased thickness
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M8 |
Suitable for thread (imperial) | 5/16 inch |
Internal diameter (d1) | 8.4 mm |
Outer diameter (d2) | 13 mm |
Height (h1) | 2.0 mm |
Thickness (s1) | 1.5 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Washer
Work trousers Kübler Image Dress New Design 2346 3411
Rigid steel-armoured pipe hot-dip galvanised, Stapa-Steck-WESF For indoor and outdoor use
Hard hat uvex pheos S-KR
Threaded pipe fittings
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Chuck with lock nut
Hexagon Socket Head Cap Screw with centre, with low head
Universal socket for size 7 to 19
Work vest