Lock washer VS A2 stainless steel
Stainless steel A2 type VS
WSH-LOK-A2-VS-22,0X15,0X1,80
Register now and access more than 125,000 products
The Belleville washer shape achieves an optimum friction fit with simultaneous mechanical interlock via the helical gearing. Higher pre-tensioning forces can be achieved due to the washer's increased thickness
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M14 |
Internal diameter (d1) | 15 mm |
Outer diameter (d2) | 22 mm |
Height (h1) | 2.5 mm |
Thickness (s1) | 1.8 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Underlays WÜTOP® Thermo ND Plus
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
TIPP® robust pipe clamp, hot-dip galvanised
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Safety boots, S1
ASSY® 4 CSMP HO universal screw with access hole Steel zinc plated partial thread countersunk milling pocket head
Wing screw, square wings Similar to DIN 316, A4 stainless steel, plain, pressed
Button-head rivet
Hexalobular-type cheese head screw ISO 14579, steel 8.8, zinc-plated, blue passivated (A2K)
Cetus work dungarees