Lock washer VS A2 stainless steel
Stainless steel A2 type VS
WSH-LOK-A2-VS-27,0X19,0X2,50
Register now and access more than 125,000 products
The Belleville washer shape achieves an optimum friction fit with simultaneous mechanical interlock via the helical gearing. Higher pre-tensioning forces can be achieved due to the washer's increased thickness
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M18 |
Internal diameter (d1) | 19 mm |
Outer diameter (d2) | 27 mm |
Height (h1) | 3.2 mm |
Thickness (s1) | 2.5 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Belt Sundström SR 553
Cable grommet CR
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Hexagon nut with fine thread DIN 934, A2 stainless steel, plain
Knurled thumb screw, low profile
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hexagonal bolt with threading up to head DIN 558, steel 4.6, plain
VARIFIX® noise dampening element With washer
Protective cap for pressure screw For quick-action clamps
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel