Lock washer VS Spring steel, mechanically applied zinc coating
Spring steel zinc plated type VS
WSH-LOK-VS-(MZN)-D36,0X54X3,0
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M36 |
Suitable for thread (imperial) | 1 3/8 inch |
Internal diameter (d1) | 38 mm |
Outer diameter (d2) | 54 mm |
Height (h1) | 3.75 mm |
Thickness (s1) | 3 mm |
Material | Spring steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Hexagon head ripp locking screw with flange
FST 40 folding sliding door fittings set For 1 pair of door leaves
MS 5000 designer escutcheon type A
ISO insert holder with S clamping system for VC indexable inserts
Hexagon Socket Head Cap Screw
EPS profile double cylinder for keyed-alike original systems
Double bolt for furniture connector SE 15
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Work dungarees
Adjusting ring DIN 705A/916