Lock washer VS Spring steel, plain
Plain spring steel type VS
WSH-LOK-VS-36,0X25,6X2,40
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M24 |
Internal diameter (d1) | 25.6 mm |
Outer diameter (d2) | 36 mm |
Height (h1) | 3.4 mm |
Thickness (s1) | 2.4 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
W-FAZ/S-UH Fixanchor with large washer for timber construction DIN EN ISO 7094 (DIN 440)
HPC Speedcut 4.0 Universal end mill, long, four blades, variable helix angle DIN 6527L, HB shank
New Air S1P safety shoes
SMART STEP EU+ HSS twist drill bit DIN 338
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Occupational shoes
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Clamping lever with male thread in reinforced design
Straight reducer fitting ISO 8434-1, zinc-nickel-plated steel