Lock washer VS Spring steel, plain
Plain spring steel type VS
WSH-LOK-VS-39,0X28,6X2,4
Register now and access more than 125,000 products
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M27 |
Internal diameter (d1) | 28.6 mm |
Outer diameter (d2) | 39 mm |
Height (h1) | 3.5 mm |
Thickness (s1) | 2.4 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | VS |
Last viewed
Screw hook with slot
Hexagonal bolt with thread up to the head
Cetus trousers with holster pockets
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Cover cap For coupling screws
Stretch X trousers
Weld stud PS-shape
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
T-piece, reduced with solder connection EN1254, copper, 5130R