Lock washer VS Spring steel, type VS, zinc-flake coating, silver (ZFSH)
Spring steel flake zinc silver type VS
WSH-LOK-VS-(ZFSH)-D22,0
Register now and access more than 125,000 products
Belleville washer shape
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M22 |
Internal diameter (d1) | 23 mm |
Outer diameter (d2) | 33 mm |
Height (h1) | 3 mm |
Thickness (s1) | 1.9 mm |
Material | Spring steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Form | VS |
Locking function | Embedding locking device |
Last viewed
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Safety boots, S2
Wire brush Klingspor BH 600
Hexagonal nut
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
T-piece EN10242 B1, hot-dip galvanised malleable iron
Cover cap for 3D hinges
Threaded rod DIN 976, A2-70 stainless steel, shape A
Serrated washer, internally serrated, shape J DIN 6797, steel, plain
Low-cut safety shoes, S1