Lock washer VS Spring steel, type VS, zinc-flake coating, silver (ZFSH)
Spring steel flake zinc silver type VS
WSH-LOK-VS-(ZFSH)-D30,0
Register now and access more than 125,000 products
Belleville washer shape
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M30 |
Internal diameter (d1) | 31.6 mm |
Outer diameter (d2) | 45 mm |
Height (h1) | 3.8 mm |
Thickness (s1) | 2.4 mm |
Material | Spring steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Form | VS |
Locking function | Embedding locking device |
Last viewed
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Safety shoe S2
Work trousers Kübler Activiq 2250 5365
Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
Twist drill bit HSS DIN 338 type RN 130°