Lock washer VS Spring steel, type VS, zinc-flake coating, silver (ZFSH)
Spring steel flake zinc silver type VS
WSH-LOK-VS-(ZFSH)-D36,0
Register now and access more than 125,000 products
Belleville washer shape
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. For difficult conditions, such as harder surfaces, slotted holes, screws of strength class 10.9 etc., the strengthened VS design is recommended.
Datasheets(X)
 | |
Suitable for screw thread | M36 |
Internal diameter (d1) | 38 mm |
Outer diameter (d2) | 54 mm |
Height (h1) | 4.5 mm |
Thickness (s1) | 3 mm |
Material | Spring steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Corrosion protection period | 720 h |
Form | VS |
Locking function | Embedding locking device |
Last viewed
Wing-type drilling screw, countersunk milling head with AW drive SCT7
Pull handle ST/A100
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut
Drop-in anchor W-ED
Locking system DUAL
Safety glasses Askella
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
ASSY® 4 PII CSMP universal screw Steel zinc-plated partial thread with underhead thread milling pocket head
Tooth-form cutter HSS pressure angle 20°
Interchangeable cylinder cores for locking system MS 5000