Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-24,0X17,0X1,50
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M16 |
Suitable for thread (imperial) | 5/8 inch |
Internal diameter (d1) | 17 mm |
Outer diameter (d2) | 24 mm |
Height (h1) | 2.3 mm |
Thickness (s1) | 1.5 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Last viewed
T-shaped cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HA shank
Die For standard metric ISO thread HSCo Multi Performance
Shim ring DIN 988, steel, plain
Protective glove nitrile TIGERFLEX® Plus
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Hexagonal bolt with thread up to the head
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6