Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-27,0X19,0X1,80
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M18 |
Internal diameter (d1) | 19 mm |
Outer diameter (d2) | 27 mm |
Height (h1) | 2.6 mm |
Thickness (s1) | 1.8 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Last viewed
Low-cut safety shoes, S2
Screw with flattened half round head with collar and hexagon socket
Plus Quadro-L hammer drill bit
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Locking system, DPS
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
EPS profile double cylinder
Akura 44 profile thumbturn cylinder
Snap ring shape SW for shaft
Hexagon nut, high profile