Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-30,0X20,0X1,8
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
 | |
Suitable for screw thread | M18 |
Suitable for thread (imperial) | 3/4 inch |
Internal diameter (d1) | 20 mm |
Outer diameter (d2) | 30 mm |
Height (h1) | 2.6 mm |
Thickness (s1) | 1.8 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Datasheets(X)
Last viewed
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Swivelling 1/2 inch extension
Vent and bird screen mesh
Connector, pneumatic
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Machine tap HSCo VaryTap blue blind hole DIN 371/376
Low-cut safety shoes, S3
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Drilling screw flat head
