Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-33,0X23,0X1,80
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
 | |
Suitable for screw thread | M22 |
Suitable for thread (imperial) | 7/8 inch |
Internal diameter (d1) | 23 mm |
Outer diameter (d2) | 33 mm |
Height (h1) | 3.0 mm |
Thickness (s1) | 1.8 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Last viewed
Weather protection rain jacket
ATO resettable fuse For continuous operation (permanent installation) and fault finding (diagnostics)
Reducing nipple, imperial thread EN10242 N4 shape II, hot-dip galvanised malleable iron
Work coat
EPS profile thumbturn cylinder
Charging cable mode 3 T2/T2
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032
piasta® wing-type drilling screw, countersunk milling head with AW drive
Vehicle cable flat cable FLRYY PVC external sheath, black
SNAP marker