Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-5,5X3,2X0,5
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
 | |
Suitable for screw thread | M3 |
Suitable for thread (imperial) | 1/8 inch |
Internal diameter (d1) | 3.2 mm |
Outer diameter (d2) | 5.5 mm |
Height (h1) | 0.95 mm |
Thickness (s1) | 0.5 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Work dungarees
RR02 tubular frame mortise lock
VARIFIX® sliding nut
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
OrgaAer hanging frame Unit width: 1000 mm
Hexagonal bolt with thread up to the head
HSS-C08 end mill, short DIN 844K
Steering wheel For Compact workshop trolley, swivelling with brake
Hexagonal bolt with shank
