Lock washer type S A2 stainless steel
Stainless steel A2 type S
WSH-LOK-A2-S-7,0X4,3X0,70
Register now and access more than 125,000 products
- The disc spring shape achieves an optimum friction fit with simultaneous form fit via the helical gearing
It makes sense in many cases – primarily when using short screws and loads which are vertical to the screw axis – to prevent the connection loosening by using lock washers to supplement the pre-tensioning force.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw thread | M4 |
Suitable for thread (imperial) | 5/32 inch |
Internal diameter (d1) | 4.3 mm |
Outer diameter (d2) | 7 mm |
Height (h1) | 1.2 mm |
Thickness (s1) | 0.7 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Last viewed
Screwdriver, Phillips
High-visibility jacket
WÜPLAST® pan head screw with flange and Z Phillips head WN 1411, steel 10.9, zinc-plated, transparent passivated (A3K)
Countersunk tapping screw, shape C with hexalobular drive
Threaded mandrel For HES 512 D rivet nut setting pliers
Hexagon Socket Head Cap Screw
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Sandpaper roll Useit® Superpad vehicle
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
SNAP marker