Locking bar With swivel handle
INDEXPLNG-B-STEEL-D5-M10
Art.-no. 5099202410
EAN 4061975398659
Register now and access more than 125,000 products
- Locking bars are used if the locking pin must temporarily not protrude
- The locking pin is retracted by turning the bar by 180°
- A detent notch holds the bar in this position
Datasheets(X)
 | |
Material | Steel |
Property class | 5.8 |
Material of handle | Steel |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Standard metric thread |
Chamfer | 30 Degree |
Form | B |
Thread type x nominal diameter (d1) | M10 |
Stud diameter (d2) | 5 mm |
Head diameter (dk) | 10 mm |
Length (l1) | 38 mm |
Length of lever (l2) | 25 mm |
Length of pin (l3) | 6 mm |
Thread length (lg) | 20 mm |
Height of lever (h1) | 9 mm |
Thickness of lever (b1) | 3 mm |
Chamfer height (f1) | 1.3 mm |
Width across flats (SW1) | 17 mm |
Spring force start | 8 N |
Spring force end | 14 N |
Product weight (per item) | 23.200 g |
Last viewed
Bandsaw blade stainless steel individual
Deep groove ball bearing FAG
Knitted protective glove with nubs Ejendals TEGERA® 8128
EPS profile thumbturn cylinder
Hexagon Socket Head Cap Screw ISO 4762, 10.9 steel with silver zinc-flake coating (ZFSHL)
Work coat Planam MG 290
Hand tap Ruko single-cut tap HSS tapered pipe thread
FLEXEN B2 fleece drain hose
Knife blade Martor reinforced razor blade no. 44
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)