Locking bolt with detent groove
A1 stainless steel, type D
BLT-LOK-MHNDL-SST-BLK-D-M8X40
Register now and access more than 125,000 products
- Moving to a different locking position is possible only once the bolt has been manually disengaged.
The locking bolt is suitable for applications with lower precision. When mounting, the specified max. tightening torque is to be observed.
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Stainless steel A1, 1.4305 |
Material of handle | PA - Polyamide |
Material of pin | Stainless steel A1, 1.4305 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Standard metric thread |
Form | D with latching notch, with lock nut |
Chamfer | 30 Degree |
Thread type x nominal diameter (d1) | M8 |
Stud diameter (d2) | 5 mm |
Head diameter (dk) | 14 mm |
Length (l1) | 40 mm |
Shaft length (ls) | 17 mm |
Thread length (lg) | 15 mm |
Height (h1) | 5 mm |
Height of the nut (h2) | 7 mm |
Chamfer height (f1) | 1.3 mm |
Width across flats (SW1) | 8 mm |
Width across flats 2 (SW2) | 13 mm |
Spring force start | 6 N |
Spring force end | 12 N |
Max. tightening torque | 7 Nm |
Product weight (per item) | 15 g |
Last viewed
Holder for bolt fixing
Bit box
45° angled tube cable lug Standard (similar to DIN)
Work dungarees
D-S-H/TZN post support bracket
M-CUBE basic set for sanitary applications
Ring nut QC 8
Square reflector with drill holes
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised