Locking bolt with detent groove
Steel, shape D
BLT-LOK-MHNDL-ST-D-M10X47,5
Register now and access more than 125,000 products
- Moving to a different locking position is possible only once the bolt has been manually disengaged
The locking bolt is suitable for applications with lower precision. When mounting, the specified max. tightening torque is to be observed.
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Free machining steel |
Material of handle | PA - Polyamide |
Material of pin | Stainless steel A1, 1.4305 |
Surface | Zinc plated |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Standard metric thread |
Form | D with latching notch, with lock nut |
Chamfer | 30 Degree |
Thread type x nominal diameter (d1) | M10 |
Stud diameter (d2) | 6 mm |
Head diameter (dk) | 18 mm |
Length (l1) | 47.5 mm |
Shaft length (ls) | 20 mm |
Thread length (lg) | 17 mm |
Height (h1) | 6 mm |
Height of the nut (h2) | 8 mm |
Chamfer height (f1) | 1.8 mm |
Width across flats (SW1) | 10 mm |
Width across flats 2 (SW2) | 17 mm |
Spring force start | 8 N |
Spring force end | 15 N |
Max. tightening torque | 15 Nm |
Product weight (per item) | 20.200 g |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Thin-walled heat-shrink hose Without internal adhesive
Stretch X trousers
Work vest
Work vest
Hose protection parts
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
VDE replacement blade for VDE screwdrivers
Cutlery insert
Centre-grooved dowel pins ISO 8742 steel plain
Mixing nozzle for MAK 38
