Locking bolt with key ring and fine thread
Steel, shape S, fine thread
INPL-RG-5.8-S-M10X1X17
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Steel |
Property class | 5.8 |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | S with lock nut |
Thread type x nominal diameter x pitch (d1) | M10 x 1 |
Stud diameter (d2) | 5 mm |
Ring diameter (d3) | 23 mm |
Shaft length (ls) | 17 mm |
Thread length (lg) | 15 mm |
Height (h1) | 5 mm |
Height of the nut (h2) | 7 mm |
Chamfer height (f1) | 1.3 mm |
Width across flats (SW1) | 13 mm |
Width across flats 2 (SW2) | 17 mm |
Spring force start | 5 N |
Spring force end | 12 N |
Product weight (per item) | 0.100 g |
Datasheets(X)
Last viewed
Pipe cable lug Without inspection hole
Hexagonal bolt
Threaded rod DIN 976, A2-70 stainless steel, shape A
Abrasive/sticker wheel Mirka Abranet
Die Ruko HSCo DIN EN 22568 metric
EPS profile thumbturn cylinder
Article sticker
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)
PVC single core H05/H07V-K, fine wire
Machine screw tap set/kit 7 pieces Ruko HSCo plain blind hole
