Locking bolt with locking groove and fine thread
Steel, shape C, fine thread
INPL-MR-5.8-C-M8X1X38,5
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Steel |
Property class | 5.8 |
Material of handle | PA - Polyamide |
Material of pin | Hardened steel |
Surface | Burnished |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | C with latching notch, without lock nut |
Thread type x nominal diameter x pitch (d1) | M8 x 1 |
Stud diameter (d2) | 4 mm |
Head diameter (dk) | 18 mm |
Length (l1) | 38.5 mm |
Shaft length (ls) | 15 mm |
Thread length (lg) | 13 mm |
Height (h1) | 4 mm |
Height of the nut (h2) | 6 mm |
Chamfer height (f1) | 1 mm |
Width across flats (SW1) | 10 mm |
Spring force start (F1) | 6 N |
Spring force end (F2) | 12 N |
Product weight (per item) | 0.100 g |
Last viewed
O-ring For vehicle air-conditioning systems
HSCo blue-ring machine tap for blind holes DIN 371/376
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Parallel pin, unhardened ISO 2338 steel plain (m6)
EPS profile thumbturn cylinder
Snap-on grommet
Work trousers
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Metal core drill bit Ruko solid carbide plain Weldon holder