Locking bolt without locking groove
A1 stainless steel, type B
BLT-LOK-MHNDL-SST-BLK-B-M12X61,7
Register now and access more than 125,000 products
- Moving to a different locking position is possible only once the bolt has been manually disengaged.
The locking bolt is suitable for applications with lower precision. When mounting, the specified max. tightening torque is to be observed.
Datasheets(X)
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Stainless steel A1, 1.4305 |
Material of handle | PA - Polyamide |
Material of pin | Stainless steel A1, 1.4305 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Standard metric thread |
Form | B without latching notch, with lock nut |
Chamfer | 30 Degree |
Thread type x nominal diameter (d1) | M12 |
Stud diameter (d2) | 8 mm |
Head diameter (dk) | 25 mm |
Length (l1) | 61.7 mm |
Shaft length (ls) | 26 mm |
Thread length (lg) | 23 mm |
Height (h1) | 8 mm |
Height of the nut (h2) | 10 mm |
Chamfer height (f1) | 2.3 mm |
Width across flats (SW1) | 12 mm |
Width across flats 2 (SW2) | 19 mm |
Spring force start | 8 N |
Spring force end | 19 N |
Max. tightening torque | 20 Nm |
Product weight (per item) | 43.000 g |
Last viewed
Apparatus castor with rotating holder
EPS profile half cylinder for keyed alike profile cylinders with original equipment
Twist drill bit, metal assortment/set 25 pieces Ruko 214215Li HSS-G DIN 338
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Concealed slide full-extension slide Dynapro With integrated soft-close system
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Low-cut safety shoes, S3
High-visibility trousers
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain