Locking bracket
Locking bracket, die-cast aluminium
ANGL-LOCKING-ALU-D80X40MM
Register now and access more than 125,000 products
Can be fixed in increments of 2.5° by means of a knurled thumb screw
Scope of delivery
- 1 angle lock incl. knurled thumb screw
- 2 screws DIN 7984 M8x18
- 2 screws ISO 7380 M8x18
- 2 washers DIN 125 8.4 mm
- 4 sliding blocks, groove 8, M8
Datasheets(X)
 | |
Profile type | I |
Suitable for flute width (N) | 8 mm |
Length (l1) | 80 mm |
Width (b1) | 80 mm |
Height (h1) | 42 mm |
Drill hole distance (l2) | 40 mm |
Material | Aluminium die-cast |
Surface | 0 - not applicable |
RoHS-compliant | Yes |
Weight | 275 g |
Last viewed
Base kit For one-hand assembly tool
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Plus Quadro-L Vario hammer drill bit
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Open-end wrench with square insert shank 14x18 mm
Paint spray Quattro
Machine tap For W.TEC® INSERT COIL helical inserts - made of HSCo; shape C
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)