Long-life diamond cutting disc for horticulture and landscaping For hand-held cutters and floor saws
Diamond cutting disc garden/landscaping HC/JC
CUTDISC-DIA-LL-JOINT-GALA-BR25,4-D350MM
ZEBRA
Register now and access more than 125,000 products
- Particularly high segments: 15 mm
- Fan segments for better dissipation of heat and removal of dust in comparison with conventional segments
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
For dry and wet cutting
Diameter (Ø) | 350 mm |
Drill hole | 25.4 mm |
Segment height | 15 mm |
Segment thickness | 3.2 mm |
Number of segments | 24 PCS |
Segment connection | Laser |
Max. rotation speed | 5400 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
FPM/ECO/AR/ECO petrol hose with low permeation for fuel-carrying applications
Tapping screw, raised countersunk head
Divider assortment With compartment rails and compartment dividers for system dimensions 16.6
Thread cutter for TIME-SERT® Made of HSS
Warning adhesive tape for food areas and hygiene zones
W-VD-A anchor rod A4 stainless steel
Safety test lead with restrictable test tips
Groove cutter for wood With cutting bit
Half-shell set, diameter 62 mm Universal, 3 pieces