Long sanding belt
Long sanding belt wood and veneer
SNDBL-LNG-KPF-P180-150X6500MM
ZEBRA
Register now and access more than 125,000 products
Minimal clogging thanks to the anti-static equipment.
This results in an extremely long service life
F-paper, half-open scattering with anti-static equipment
- Extremely high load-bearing capacity of sanding belts (e.g. calibration)
- Prevents the sanding belt from clogging up too soon
- Optimum grinding finish
- Low impact from grinding dust (fine dust)
The belts should be stored in dry, frost-free rooms. Do not store near heaters, cold or damp walls, doors or windows and not directly on the floor. Storage temperatures between 18°C and 22°C at a relative humidity between 45% and 65% are recommended. Protect belts from exposure to direct sunlight. If possible, store sanding belts in the original packaging until used. Store sanding belts that have been removed from the packaging in such a way that deformations are prevented.
Datasheets(X)
For wide-belt sanding machines
Calibration, sanding of cabinet fronts and side panels, sanding of frame components for solid wood cupboards. Especially suitable for veneers, solid wood (hardwood, softwood, cross-grained wood, resinous woods) and wood materials.
Width x length | 150 mm x 6500 mm |
Grid size | P180 |
Antistatic | Yes |
Scattering | Half-open scattering |
Backing material | F-weight paper |
Material of abrasive medium | Aluminium oxide |
Last viewed
Magno padlock
RR02 panic tubular frame mortise lock
LED UV torch For use when searching for leaks highlighted by UV leak detection additives in vehicle air-conditioning units
Pan head screw with Z cross recess DIN 7985, steel 4.8, plain
Hexalobular-type cheese head screw, low head
ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
Helical insert W.TEC® INSERT COIL Free Running fine thread
Work dungarees
Tile adhesive spreader made of spring steel
Cylinder tapping screw, shape C with slot DIN 7971, A2 stainless steel, plain