Longlife & Speed roof diamond cutting disc
Diamond cutting disc LS roof
CUTDISC-DIA-LS-ROOF-BR22,23-D125MM
ZEBRA
Register now and access more than 125,000 products
Optimal cutting quality
The extra-thin, finely toothed closed cutting edge facilitates absolutely precise, rapid cuts and cleanly cut edges.
Absolutely smooth running
Disc does not wobble or vibrate owing to corrugated carrier specially reinforced in the centre
Cutting without high application of force
The extremely thin segment focuses the cutting force very precisely.
Optimised cooling and reliable direction indication
Special cooling openings with an "arrow arrangement" provide additional cooling and serve as a captive running direction indicator.
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Separate larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure — the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped wrongly or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
- Particularly suitable for soft/hard clay bricks, old concrete, concrete, exposed aggregate concrete, interlocking paving stones, concrete piping, marble, soft/hard granite, stoneware pipes, soft/hard clinker brick, soft/hard Poroton, concrete tiles/pan tiles, glazed and Frankfurt pan tiles
- For dry and wet cutting
Versatility (points system) | 4 of 4 points |
Service life (points system) | 4 of 4 points |
Cutting speed (point system) | 4 of 4 points |
Cut quality (point system) | 4 of 4 points |
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 12 mm |
Segment thickness | 1.8 mm |
Segment connection | Sintered |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Flat steel concrete anchor L-profile
Yellow nitrile glove
Oiler/Mist lubricator
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain
IFI-111 steel case-hardened zinc-pl. yel. serr.
Precision square made from aluminium and wood
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Four-way T-distributor
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)