Low-temperature fixed point bracket, type 173-F-2-K
Low-temperature fixed point bracket, type 173/F 2K
LTEMPFIXPT-(173-F-2-K)-HDG-PIPET219,1MM
Register now and access more than 125,000 products
- Three cold pipe clamps produced from PUR hard foam
- Hot-dip galvanised screws and nuts, FK 8.8
- Suitable for absorbing high pipe shear forces owing to two welded rings
- Bracing with welded junction plates
- Fulfils temperature insulation and diffusion density requirements
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection.
All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
 | |
DN nominal width | DN 200 |
Suitable for pipe external diameter (ØD) | 219.1 mm |
Permissible tensile force (without overlap guard) (FX) | 12.35 kN |
Permissible transverse tensile force (FY) | 15 kN |
Insulating-material thickness (DS) | 60 mm |
Length (L1) | 300 mm |
Metal-band width (BM) | 100 mm |
Tube axis dimension (RA) | 236 mm |
Bottom of pipe (RS) | 126 mm |
Product weight (per item) | 38400 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Countersunk slotted head screw, Z ISO 7046-2, A2-70 stainless steel, plain
T-piece, reduced with solder connection EN1254, copper, 5130R
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Work trousers
Hexagonal bolt with threading up to head
Work shirt, long-sleeved Olymp Level Five body fit
Work trousers
4KS profile thumbturn cylinder for keyed alike systems with original equipment
Toggle lever for ISO P clamping system