Low-temperature fixed point bracket, type 173-F-2-K
Pre-insulated support type 173/F 2K
LTEMPFIXPT-(173-F-2-K)-HDG-PIPET323,9MM
Art.-no. 0862945323
EAN 4046778193175
Register now and access more than 125,000 products
- Three cold pipe clamps produced from PUR hard foam
- Hot-dip galvanised screws and nuts, FK 8.8
- Suitable for absorbing high pipe shear forces owing to two welded rings
- Bracing with welded junction plates
- Fulfils temperature insulation and diffusion density requirements
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection.
All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
 | |
DN nominal width | DN 300 |
Suitable for pipe external diameter (ØD) | 323.9 mm |
Permissible tensile force (without overlap guard) (FX) | 20.52 kN |
Permissible transverse tensile force (FY) | 26.25 kN |
Insulating-material thickness (DS) | 60 mm |
Length (L1) | 300 mm |
Metal-band width (BM) | 100 mm |
Tube axis dimension (RA) | 293 mm |
Bottom of pipe (RS) | 131 mm |
Product weight (per item) | 54930 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Highly flexible extension For tyre valve
Plus Quadro-L Vario hammer drill bit
SC 90° countersink DIN 335C
Article sticker
Abrasive cloth roll VSM KK114F in tear-off box
Machine screw tap, through hole Ruko UNF DIN 2183 HSCo plain shape B
S1 safety boot Elten Anthony Mid ESD
Milling bit Ruko tungsten carbide milling bit type D spherical (KUD) plain
Spanner, XZN 3/8 inch
Castellated nut, low profile with fine thread DIN 937, steel, 17H/22H, plain