Low-temperature fixed point bracket, type 173-F-2-K
Low-temperature fixed point bracket, type 173/F 2K
LTEMPFIXPT-(173-F-2-K)-HDG-PIPET355,6MM
Register now and access more than 125,000 products
- Three cold pipe clamps produced from PUR hard foam
- Hot-dip galvanised screws and nuts, FK 8.8
- Suitable for absorbing high pipe shear forces owing to two welded rings
- Bracing with welded junction plates
- Fulfils temperature insulation and diffusion density requirements
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection.
All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
 | |
DN nominal width | DN 350 |
Suitable for pipe external diameter (ØD) | 355.6 mm |
Permissible tensile force (without overlap guard) (FX) | 24.89 kN |
Permissible transverse tensile force (FY) | 32.25 kN |
Insulating-material thickness (DS) | 60 mm |
Length (L1) | 360 mm |
Metal-band width (BM) | 120 mm |
Tube axis dimension (RA) | 310 mm |
Bottom of pipe (RS) | 126 mm |
Product weight (per item) | 58980 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Hexagon nut, heavy-duty design, inch
Extension for flush-mounted trap Polypropylene white
Work trousers
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Cutting disc Klingspor A 946 TZ Special
PRINETO flush-mounted distribution box
Flat connector contact M/P SLD 1.5
Sandpaper roll Klingspor PS 22 N
Work dungarees