Low-temperature fixed point bracket, type 173-F-2-K
Low-temperature fixed point bracket, type 173/F 2K
LTEMPFIXPT-(173-F-2-K)-HDG-PIPET457,6MM
Register now and access more than 125,000 products
- Three cold pipe clamps produced from PUR hard foam
- Hot-dip galvanised screws and nuts, FK 8.8
- Suitable for absorbing high pipe shear forces owing to two welded rings
- Bracing with welded junction plates
- Fulfils temperature insulation and diffusion density requirements
Load specifications for standard dimensions at +100°C taking as basis customary screw tightening torques. Note potentially reduced load on clamped connection.
All pipe bearings are also available upon request with pipe clamp rotated 45°.
Datasheets(X)
 | |
DN nominal width | DN 450 |
Suitable for pipe external diameter (ØD) | 457.2 mm |
Permissible tensile force (without overlap guard) (FX) | 40.85 kN |
Permissible transverse tensile force (FY) | 56.25 kN |
Insulating-material thickness (DS) | 60 mm |
Length (L1) | 360 mm |
Metal-band width (BM) | 120 mm |
Tube axis dimension (RA) | 362 mm |
Bottom of pipe (RS) | 133 mm |
Product weight (per item) | 92510 g |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
Ring bolt H.Q.E. with variable screw length
Work dungarees
Complete printed Clipster number plate holder
Swivel arm "Duo"
Manufactured from the Würth aluminium profile system WAPS®
System case empty range 8.4.1
Breathing mask, disposable
Kinvaro F-20 folding flap fitting With integrated adjustable damping
4KS profile double cylinder
4KS profile double cylinder
Cover profile For redoslide M45-HV, top and bottom