MG III fire protection cement

Name: MG III fire protection cement
Brand: Würth
SKU: 089330715

FPCMNT-MGIII-15KG

Art.-no. 089330715

EAN 4024835859653

All versions

Individual price display after login

MG III fire protection cement

Art.-no. 089330715

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Mortar in mortar group III in accordance with DIN 1053-1, classified as building material A1 in accordance with DIN 4102-4, suitable for fire doors, fire dampers or for sealing gaps in individual partitions.

Seals off fire and combustion gases, reduces temperature, seals off rooms, resistant to splash water and extinguishing water jets, mechanically stable.

Ready-to-use mixture.

Firm even at higher construction heights.

Suitable for pumping, pressing and for manual application.

Proof of Performance

Fire protection cement mortar from mortar group III

Test certificate issued by MPA Hannover

Notice

To insulate ducts in walls and ceilings, always use A1 or A2 mineral wool in accordance with DIN 4102

with a melting point < 1,000 °C.

Clean the opening and pre-wet the component reveal

Premix dry cement. First put water, then cement into the mixing container. Mix for 4 minutes at 300-400 rpm.

Installation of the fire protection cement. Panel over larger ducts on one side.

Affix ID plate

Dimensions
No limit to partition dimensions
Non-flammable pipes	≤ 150 mm without fire protection sleeve
Combustible pipes	≤ 32 mm
Combustible pipes	≥ 32 mm in combination with fire protection sleeve 21
Yield
By adding 3 l of water, 15 kg of dry mortar will yield 9 l of wet mortar.
By adding 5 l of water, 25 kg of dry mortar will yield 15 l of wet mortar.

Demand assessment
Example:	Partition	L x W	40 x 40 cm
	Fire damper	l · w	Approx. 20 x 20 cm
	Partition thickness	T	Approx. 20 cm
F1	Partition	(40·40 cm)	= 1,600 cm²
- F2 F	Fire damper surface to be sealed	(20·20 cm)	= 400 cm² -------------------- = 1,200
Partition thickness T (20 cm) x surface to be sealed F (1,200 cm²) 1 kg dry mortar			= 24,000 cm³ ≙ 560 cm³
560 cm³ 24,000 cm³ X = 24,000 x 1 -------------------------------- 560	= 1 kg mortar = X = 42 kg dry mortar

Fire protection cement mortar from mortar group III

Test certificate issued by MPA Hannover

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For use in system [A], [B1], [F], [F2], [F3], [G1], [G2], [H], [H1], [H2], [H3], [I]

Combination penetration seal [A]

Cable box [B1]

Pipe penetration seal M, [F]

Pipe penetration seal M light, [F2]

Pipe penetration seal I plus/I iso, F3

Pipe penetration seal intumescent, [G1]

Pipe penetration seal dB, [G2]

Pipe penetration seal Z, [H]

Pipe penetration seal KL, [H1]

Pipe penetration seal intumescent mat plus, [H2]

Pipe penetration seal intumescent pipe wrap plus, [H3]

Joint system K, [I]

Pressure-resistant fire protection cement mortar is ideally suited for the installation of fire doors, fire dampers or for sealing gaps in individual partitions. It belongs to mortar group III in accordance with DIN 1053-1 and is classified as building material A1 in accordance with DIN 4102-4.

Required accessory:

Product

Description

Quantity

Price
/PU

Assembly set for MG III fire protection cement

ASMBY-SET-F.FPCMNT

Art.-no. 08933072

Included in the scope of delivery are 2 identification plates, 1 approval, and 1 installation instructions

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 6

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 6

Very robust, submersible PVC glove with cotton support fabric

Chemical protective glove made from chloroprene and latex

Description:

Permeation level: 6

Cotton flocking on the inside

Nitrile chemical protective glove

Description:

Permeation level: 6

With cotton velour finish inside.

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove chloroprene

Description:

Permeation level: 6

Heavy-duty design

Chemical protective glove nitrile with backing fabric

Description:

Permeation level: 6

Robust, liquid-tight protective glove with polyamide support fabric that combines optimum chemical protection, secure grip and comfort

Disposable nitrile glove

Description:

Permeation level: 6

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 6

Unique, diamond texture for optimal grip

Disposable glove Nitrile Grip Comfort

Description:

Permeation level: 6

Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside

Disposable gloves, nitrile, extra strong, type A

Description:

Permeation level: 6

Durable and robust disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.