MS 5000 designer escutcheon type A
Design rosette MS 5000, type A
DESGROS-F.FRNLOK-(MS5000-A)-(NI)
Register now and access more than 125,000 products
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Gloss level | Matt |
Drill hole diameter | 21 mm |
Outer diameter | 28 mm |
Internal diameter | 18 mm |
Last viewed
Solid carbide end mill DIN 6527L, long, triple blade with reinforced shank
Additional function EPS
Multi-range clamp
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Ring nut H.Q.E.
Intermediate jaw for M press slings
Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts, DIN 125, plain brass
Hexagonal bolt with shank ISO 4014, 12.9 steel with silver zinc-flake coating (ZFSHL)