MS 5000 disconnect pin For turning knob
Disconnect pin
DISCONPIN-F.FRNLOK-MS5000
Register now and access more than 125,000 products
Datasheets(X)
Disassembly of interchangeable core cylinder. If there are decorative buttons, use a screwdriver to pierce the plastic cap in the middle of the head and pull the cap out. Insert the screwdriver through the cylinder housing into the oval pouch in the base and turn the adapter so that the pouch is upright over the two holes. Feed the release pin all the way through the hole in the adapter and press lightly on the side of the release pin head to remove the rotary knob.
 | |
Length | 85 mm |
Width | 23 mm |
Last viewed
High Power battery
Self-drilling façade construction screw Sandwich piasta® A2 stainless steel
Hexagon head bolt MS 90728, steel GR8, zinc-plated yellow
Fall arrester set for lifting platforms
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
VARIFIX® Power Lock 41 quick fastener For all 41 profiles, can be used outdoors
Hammer drill bit Plus Duo-S Vario
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
ASSY® D
plug screw Countersunk head
Burn gel