Machine tap HSCo Longlife blue ring TiN through hole DIN 371/376
Machine screw tap HSCo longlife blue form B
MATAP-THRGHO-HSCO-DIN371-TIN-BLUE-M4
ZEBRA
Register now and access more than 125,000 products
Up to twice the service life as well as up to 50% higher cutting speed compared to similar uncoated tools
Optimized TiN coating
- Sufficient coolant and lubricant must be added when cutting threads.
- For the machine tap/material assignments, see the overview tables
Datasheets(X)
Before reversing the screw tap, the entire spiral point of the tool must be removed from the drill hole. Failure to do so may cause cutting edges to chip or the tool to break.
Thread type | Metric thread |
Material to be processed | Steel |
Hole type | Clearance hole ≤ 3xD |
Suitable for machine type | Milling/drill center |
Quality | ZEBRA-Premium |
Thread type x nominal diameter | M4 |
Pitch | 0.7 mm |
Length | 63 mm |
Shank diameter | 4.5 mm |
Size of square | 3.4 mm |
DIN | 371 |
Cutting material | HSCo |
Surface | TiN |
Form | B |
Core hole diameter | 3.3 mm |
Shank style | Cylindrical with square drive |
Tolerance of screw taps | ISO 2 (6H) |
Suitable for tensile strength up to | 1000 N/mm² |
Service life (points system) | 4 of 4 points |
Trueness to gauge (points system) | 4 of 4 points |
Versatility (points system) | 2 of 4 points |
Cutting behaviour (points system) | 3 of 4 points |
Chip formation (points system) | 3 of 4 points |
Material of sub-group | General structural steels |
Last viewed
Foam roller WB For water-based paints
Hexagonal bolt
S1PL safety shoe Uvex1 x-craft pro
S1PL safety shoe New Balance Logic 2143
Type-V angle connector with slotted hole
Low-cut safety shoes S1 Steitz CP 4100 ESD
Screw, flattened half round head, with collar and hexagon socket assortment 1,153 pieces in system case 4.4.1. ISO 7380-2
S1PL safety shoe New Balance Logic 1044
Jacket Planam Highline
Wing screw, round wings DIN 316, steel 4.6, zinc-plated, thick-film passivated (VZD)