Manual drive-in stamp For system connector
Manual drive-in punch for system connector
MANDRIVINPNCH-F.SYSCON
Register now and access more than 125,000 products
- To efficiently mount system connectors that have been pre-drilled with CNC or VBL-2
- Flat mounting surface for connectors
- The fitting and drill hole are not damaged
- Wide mount for positioning on the edge of the material
- Joints are mounted according to the angle. With single-pins, the mount can be lowered
- For system connectors: SV 30, SV 20 E
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Material | Steel / plastic |
Surface | 0 - not applicable |
Last viewed
Floor attachment set For floating installation of the equipment
EPS profile thumbturn cylinder
EPS profile thumbturn cylinder
Connection sleeve with bolt For system connector SV 20 E
Die For standard metric ISO thread HSCo Multi Performance
EPS profile thumbturn cylinder
EPS profile double cylinder
Concrete screw W-BS/S type ST-6 as a stair bolt With connecting thread
Synchronisation module For Dynapro Tipmatic full-extension concealed slide 40/60 kg
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain