Manual screw tap, assortment 2-piece Ruko hand tap cassette HSS DIN 2181 fine thread
Hand tap set HSS DIN 2181 fine thread 2 pcs Ruko
HNDTAP-RUKO-235030-HSS-MF3X0,35
Register now and access more than 125,000 products
Taper tap: approx. 5-6-speed first cut / third tap: approx. 2-3-speed first cut
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 2 PCS |
Standards | DIN 2181 |
Thread type x nominal diameter | M3 |
Pitch | 0.35 mm |
Length | 40 mm |
Thread length (metric thread) | 10.0 mm |
Core hole diameter | 2.60 mm |
Material | HSS |
Last viewed
Raised countersunk head screw with Z recessed head DIN 966, A2 stainless steel, plain
WÜPOFAST® A2 chipboard screw A2 stainless steel, full thread, raised countersunk head, PZ
Hexagon nut DIN 934, A4 stainless steel, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Asbestos sheeting sack With skirting and fastener bands
EPS profile thumbturn cylinder
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Work dungarees