Manual screw tap, assortment 29-piece Ruko hand tap cassette HSS DIN 352
Hand tap cassette HSS DIN 352 29 pcs Ruko
HNDTAP-RUKO-245003-HSS-M3-M12
Register now and access more than 125,000 products
- 3-piece set in each of: M 3 - M 4 - M 5 - M 6 - M 8 - M 10 - M 12
- + 7 twist drill bits DIN 338 type N dia. 2.5 - 3.3 - 4.2 - 5.0 - 6.8 - 8.5 - 10.2 mm
- + 1 tap wrench DIN 1814 size 1 1/2
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 29 PCS |
Standards | DIN 352 |
Material | HSS |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat cylinder head and hexalobular drive
Clamping pin/clamping sleeve
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Wedge lock washer, W.TEC series, wide shape
HSCo Multi Special MF thread machine tap for through holes DIN 374
CLIP-O-FLEX® holder Perfoflex Flexible perforated metal plate wall
Hexagon nut, type B/A4 DIN 934 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
TIPP® Smartlock GS pipe clamp
Double cylinder S5 locking system
TIPP® fixed point bracket 2 pieces