Manual screw tap, assortment 3-piece Ruko hand tap cassette HSCo DIN 352
Hand tap set HSCo DIN 352 3 pcs Ruko
HNDTAP-RUKO-230020E-HSSE-CO5-M10X1,50
Register now and access more than 125,000 products
Taper tap: approx. 6-8-speed first cut / second tap: approx. 4-5-speed first cut / third tap: approx. 2-3-speed first cut
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 3 PCS |
Standards | DIN 352 |
Thread type x nominal diameter | M2 |
Pitch | 0.40 mm |
Length | 36 mm |
Thread length (metric thread) | 8 mm |
Core hole diameter | 1.60 mm |
Material | High-speed steel with 5% cobalt content |
Last viewed
2C assembly aid for ELMO® flush-mounted installation boxes
Straight reducer fitting ISO 8434-1, stainless steel 1.4571
TENAX lower section quick-action closure 10 mm hole
Work dungarees
Round cable passage in two parts
Partitioning set For ORSY® system case 8.4.2
SCHIMOS 80/120-H front panel profile for wooden doors
Stud bolts
Bodywork double hook
Deep-penetrating primer