Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352
Hand tap set HSS DIN 352 3 pcs Ruko
HNDTAP-RUKO-230030-HSS-M3X0,50
Register now and access more than 125,000 products
Taper tap: approx. 6-8-speed first cut / second tap: approx. 4-5-speed first cut / third tap: approx. 2-3-speed first cut
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 3 PCS |
Standards | DIN 352 |
Thread type x nominal diameter | M3 |
Pitch | 0.50 mm |
Length | 40 mm |
Thread length (metric thread) | 10.0 mm |
Core hole diameter | 2.50 mm |
Material | HSS |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
4KS profile thumbturn cylinder for keyed alike systems with original equipment
Tapered roller bearing FAG
Assembly gloves Ansell Fibertuf® 76-501
Cover plate Type DP
WLA 18.0 cordless LED work lamp With two high-performance LED arrays
Cylinder tapping screw, shape C with slot DIN 7971, A2 stainless steel, plain
Cut protection glove W-200 Level C
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
90° angled adjustable sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Contact tip MB 25 AK For welding torch MB 25 AK
