Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 Whitworth BSW 3 pieces
Hand tap set HSS DIN 352 Whitworth BSW 3 pcs Ruko
HNDTAP-RUKO-246178-HSS-17/8ZO-55GRD
Register now and access more than 125,000 products
Taper tap: approx. 5-6-speed first cut / second tap: approx. 4-5-speed first cut / third tap: approx. 2-3-speed first cut
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 3 PCS |
Standards | DIN 352 |
Length | 180 mm |
Thread length (metric thread) | 75.0 mm |
Core hole diameter | 41.50 mm |
Material | HSS |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Paint spray Quattro
Basket set
Accessories for identification rings
Fire protection duct outer corner I30/I60/I90/I120
C 6.3 TX bit (1/4 inch)
Keyed alike skeleton key for NP bearing cylinder
Cable tie KBL 1 made of polyamide with plastic tongue
Lock latch
Angular adapter plate For quick-action clamps
Short sanding belt Klingspor LS 309 XH
