Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 Whitworth BSW 3 pieces
Hand tap set HSS DIN 352 Whitworth BSW 3 pcs Ruko
HNDTAP-RUKO-246716-HSS-7/16ZO-55GRD
Register now and access more than 125,000 products
Taper tap: approx. 5-6-speed first cut / second tap: approx. 4-5-speed first cut / third tap: approx. 2-3-speed first cut
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 3 PCS |
Standards | DIN 352 |
Length | 70 mm |
Thread length (metric thread) | 24 mm |
Core hole diameter | 9.30 mm |
Material | HSS |
Last viewed
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Hexagonal bolt, with thread to head and fine thread
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-plated, blue passivated (A2K)
Lever riveter HNG 28 N
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Screwdriver PH striking cap with hexagon shank
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Trade work T-shirt