Manual screw tap, assortment 3-piece Ruko hand tap cassette HSS DIN 352 left-hand thread
Hand tap set HSS DIN 352 l.-h. thread 3 pcs Ruko
HNDTAP-RUKO-230180LI-HSS-M18X2,50
Register now and access more than 125,000 products
Taper tap: approx. 6-8-speed first cut / second tap: approx. 4-5-speed first cut / third tap: approx. 2-3-speed first cut
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Number of pieces in assortment/set | 3 PCS |
Standards | DIN 352 |
Thread type x nominal diameter | M18 |
Pitch | 2.50 mm |
Length | 95 mm |
Thread length (metric thread) | 40 mm |
Core hole diameter | 15.50 mm |
Material | HSS |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
T-handle, TX with side tip
Key, high profile DIN 6885, steel, plain, shape AB
Locking system DUAL
90° HSCo WN type RN TiAlN NC spotting drill bit
Plastic end grommet For rigid electrical conduits
EPS profile double cylinder
Charger ALG 80 For Fein cordless multi cutter AMM 500
Cable tie tensioner for stainless steel cable ties
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread