Manual screw tap, third tap Ruko hand tap HSS DIN 352 third tap
Hand tap HSS DIN 352 plug Ruko
HNDTAP-RUKO-230100-3-HSS-M10X1,50
Art.-no.
1971004710
EAN 4007140024008
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Third tap: approx. 2-3-speed first cut
The thread is cut in three operations.
Product information
Datasheets(X)
Application areaFor through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M10 |
Pitch | 1.50 mm |
Length | 70 mm |
Thread length (metric thread) | 24.0 mm |
Core hole diameter | 8.50 mm |
Material | HSS |
Thread type | Metric thread |
Last viewed
Sanding belt, fabric VSM XK870X
Connector, pneumatic
RW® bit
Vinyl care plastic care agent
Wire end ferrule with plastic sleeve
Wire end ferrule without plastic sleeve
Bottom clamp
Twist drill bit HSS DIN 338 type RN 118°
EPS profile thumbturn cylinder
Metric ratchet combination wrench with ratchet function on both the box and open ends