Manual taper tap Ruko hand tap HSCo DIN 352 taper tap
Hand tap HSCo DIN 352 taper Ruko
HNDTAP-RUKO-230020E-1-HSSE-CO5-M2X0,40
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M2 |
Pitch | 0.40 mm |
Length | 36 mm |
Thread length (metric thread) | 8 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Low-cut safety shoes, S2
Charger set For WLH 1.3 and 1.5 cordless LED hand-held lamp
Hexagonal bolt with thread up to the head
EPS profile thumbturn cylinder
Information frame, write-on, magnetic
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
System case 8.4.5
Soft wax
Tapered roller bearing FAG
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)