Manual taper tap Ruko hand tap HSCo DIN 352 taper tap
Hand tap HSCo DIN 352 taper Ruko
HNDTAP-RUKO-230040E-1-HSSE-CO5-M4X0,70
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M4 |
Pitch | 0.70 mm |
Length | 45 mm |
Thread length (metric thread) | 12.0 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Coach bolt
Slotted set screw with tip ISO 7434, A1 plain stainless steel
Stretch Evolution shorts
Intermediate layer for ISO P clamping system
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, plain
Furniture handle screw For attaching furniture handles with M4 connecting threads and combination slot drive
Locking system, DPS
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Cube connector set