Manual taper tap Ruko hand tap HSCo DIN 352 taper tap
Hand tap HSCo DIN 352 taper Ruko
HNDTAP-RUKO-230050E-1-HSSE-CO5-M5X0,80
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M5 |
Pitch | 0.80 mm |
Length | 50 mm |
Thread length (metric thread) | 13.0 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Gas and combination filter 3M 6099 A2B2E2K2P3
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Filter/regulator with manometer For CA preparation unit size 2
Disposable protective glove Ansell Microflex MidKnight™ Touch 93-732
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Twist drill bit HSS DIN 1897 type RN
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
O-ring, metric
Support clip, type BW
EPS profile double cylinder