Manual taper tap Ruko hand tap HSCo DIN 352 taper tap
Hand tap HSCo DIN 352 taper Ruko
HNDTAP-RUKO-230060E-1-HSSE-CO5-M6X1,00
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M6 |
Pitch | 1 mm |
Length | 56 mm |
Thread length (metric thread) | 15 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Thread mandrel With nozzle
High-visibility jacket
Safety sandals, S1P
pias® drilling screw, flat head with AW drive
Measuring coupling
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Universal thinner For almost all solvent-based paint and primer materials
Work dungarees
Hexagonal bolt with shank
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)