Manual taper tap Ruko hand tap HSCo DIN 352 taper tap
Hand tap HSCo DIN 352 taper Ruko
HNDTAP-RUKO-230080E-1-HSSE-CO5-M8X1,25
Register now and access more than 125,000 products
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M8 |
Pitch | 1.25 mm |
Length | 56 mm |
Thread length (metric thread) | 18.0 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Stud screw Zinc-plated steel
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hard hat uvex airwing B S
EPS profile double cylinder
Work trousers
Work trousers
Furniture handle screw
Threaded rod DIN 976, A2-70 stainless steel, shape A
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Outer corner For FB windowsill duct
