Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Hand tap HSS DIN 2181 UNF taper Ruko
HNDTAP-RUKO-246050UNF1-HSS-NO.5
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | UNF3.175 |
Length | 36 mm |
Thread length (metric thread) | 11 mm |
Material | HSS |
Thread type | UNF |
Last viewed
Self-tapping thread insert with cutting slot
E90 fire protection duct outer corner
Threaded fitting
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with flange in accordance with MBN standard
ORSY®BULL series 5 front loader combination box
Safety boots, S3
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Wet sanding paper, sheets Wet sanding paper, sheets
Pipe cable lug Without inspection hole